2种灰色模型在矿区地表沉陷预计中的适用性

目前矿区地表单点沉陷动态预计方法主要基于传统的水准测量数据,监测方法单一,成本高,观测点易破坏,不能保证地表形变信息的实时性,且采用灰色模型进行地表沉陷预计时只针对单一模型的应用,没有结合模型自身特点分析其适用性。以袁店二矿7221工作面为试验区域,采用合成孔径雷达差分干涉测量技术监测矿区地表沉陷量,分别建立了描述沉陷量与时间关系的GM(1,1)与灰色Verhulst模型进行地表沉陷量预计,实现了矿区地表沉陷监测与动态预计一体化。通过比较、分析GM(1,1)与灰色Verhulst模型对地表沉陷量的拟合及预计结果,得出了2种灰色模型在矿区地表沉陷预计中的适用性:在矿区开采沉陷开始至活跃前期,若地表单点沉陷量曲线呈近似单峰型,则宜采用GM(1,1)进行短期预计;当矿区地表沉陷进入衰退阶段,单点沉陷量曲线呈平底饱和状态,则宜采用灰色Verhulst模型进行中长期预计。     

How Far Are We from Prescribing Fasting as Anticancer Medicine?

(1) Background: the present review provides a comprehensive and up-to date overview of the potential exploitation of fasting as an anticancer strategy. The rationale for this concept is that fasting elicits a differential stress response in the setting of unfavorable conditions, empowering the survival of normal cells, while killing cancer cells. (2) Methods: the present narrative review presents the basic aspects of the hormonal, molecular, and cellular response to fasting, focusing on the interrelationship of fasting with oxidative stress. It also presents nonclinical and clinical evidence concerning the implementation of fasting as adjuvant to chemotherapy, highlighting current challenges and future perspectives. (3) Results: there is ample nonclinical evidence indicating that fasting can mitigate the toxicity of chemotherapy and/or increase the efficacy of chemotherapy. The relevant clinical research is encouraging, albeit still in its infancy. The path forward for implementing fasting in oncology is a personalized approach, entailing counteraction of current challenges, including: (i) patient selection; (ii) fasting patterns; (iii) timeline of fasting and refeeding; (iv) validation of biomarkers for assessment of fasting; and (v) establishment of protocols for patients’ monitoring. (4) Conclusion: prescribing fasting as anticancer medicine may not be far away if large randomized clinical trials consolidate its safety and efficacy.     

基于化学监督的超(超)临界机组关键控制节能指标分析及建议

针对超(超)临界机组参数提高、材质升级,化学技术监督中的监督指标对机组经济性和可靠性影响较大的问题,本文通过机组典型案例分析、技术监督报告、现场实测等,对目前化学监督中影响较大的、关键的技术指标进行了系统性的分析研究。研究结果找出了6项化学监督中超(超)临界机组关键的、影响较大的控制监督指标,且提出了指标控制值和控制方法。这项系统性研究分析方法对指导超(超)临界机组化学监督具有重要的借鉴作用,以控制超(超)临界机组因参数提高和材质升级带来的新问题和新挑战。     

Systematic convergence of nonlinear stochastic estimators on the Special Orthogonal Group SO(3)

This paper introduces two novel nonlinear stochastic attitude estimators developed on the Special Orthogonal Group with the tracking error of the normalized Euclidean distance meeting predefined transient and steady‐state characteristics. The tracking error is confined to initially start within a predetermined large set such that the transient performance is guaranteed to obey dynamically reducing boundaries and decrease smoothly and asymptotically to the origin in probability from almost any initial condition. The proposed estimators produce accurate attitude estimates with remarkable convergence properties using measurements obtained from low‐cost inertial measurement units. The estimators proposed in continuous form are complemented by their discrete versions for the implementation purposes. The simulation results illustrate the effectiveness and robustness of the proposed estimators against uncertain measurements and large initialization error, whether in continuous or discrete form.     

Preparation and properties of chitosan/acidified attapulgite composite proton exchange membranes for fuel cell applications

A composite proton exchange membrane chitosan (CS)/attapulgite (ATP) was prepared with the organic–inorganic compounding of ATP and CS. The composite membranes were characterized by scanning electron microscope (SEM), X-ray diffraction (XRD), and fourier transform infrared spectroscopy (FTIR). The mechanical properties, thermal stability, water uptake, and proton conductivity of the composite membranes were fully investigated. The composite membranes exhibited an enhanced mechanical property, dimensional and thermal stability compared to CS membrane, owing to the interface interaction between ATP and CS. The maximum tensile strength of 53.1 MPa and decomposition temperature of 223.4°C was obtained, respectively. More importantly, the proton conductivity of the composite membrane is also enhanced, the composite membrane with 4 wt% ATP content (CS/ATP-4) exhibited the highest proton conductivity of 26.2 mS cm⁻¹ at 80°C with 100% relative humidity, which is 25.1% higher than pure CS membrane. These results may explore a simple and green strategy to prepare CS-based PEMs, which have a great potential in the application of proton exchange membrane fuel cells.     

近距离煤层综采工作面均压防灭火技术应用研究

为解决近距离煤层开采过程中上层采空区遗煤自燃导致工作面回风隅角和回风流中CO超限的问题，采用联合均压防灭火技术，通过增大进、回风巷风阻，减小两巷压差的方式，减少气体交换，抑制了上部采空区CO的逸出，同时配合注氮、堵漏和地面塌陷坑回填等综合防火技术，从源头治理了上部采空区自燃隐患，保证回采工作面的安全生产。     

相邻雷达回波强度差异分析

文章选用2017-12-13的青浦站和南通站体扫数据和单站格点CAPPI数据,利用时空一致性匹配法和单站格点数据等距离线法对两站雷达回波强度差异情况进行了研究,并分析了两种算法可能存在的误差,结果表明:单站格点数据等距离线法要优于时空一致性匹配法,更适用于单部雷达体扫数据的相邻雷达回波差异对比;在雷达基数据正确的情况下,时空一致性匹配法误差主要来源于做不到真正的时空匹配一致,格点数据等距离线法误差主要来源于生成格点数据时插值算法不完善。     

Predicting visual similarity between colour palettes

This work is concerned with the prediction of visual colour difference between pairs of palettes. In this study, the palettes contained five colours arranged in a horizontal row. A total of 95 pairs of palettes were rated for visual difference by 20 participants. The colour difference between the palettes was predicted using two algorithms, each based on one of six colour-difference formulae. The best performance (r² = 0.86 and STRESS = 16.9) was obtained using the minimum colour-difference algorithm (MICDM) using the CIEDE2000 equation with a lightness weighing of 2. There was some evidence that the order (or arrangement) of the colours in the palettes was a factor affecting the visual colour differences although the MICDM algorithm does not take order into account. Application of this algorithm is intended for digital design workflows where colour palettes are generated automatically using machine learning and for comparing palettes obtained from psychophysical studies to explore, for example, the effect of culture, age, or gender on colour associations.     

基于差分进化算法的手眼标定方法

针对眼在手机器人视觉系统的手眼标定问题，提出了一种基于差分进化算法的手眼标定方法。首先建立了眼在手机器人视觉系统手眼标定的数学模型，通过李群李代数理论，将手眼标定问题转化为误差函数的优化问题，同时保证了优化问题的最优解落在特殊欧氏群ＳＥ（３）上。通过差分进化算法对优化问题进行求解，避免了求解过程中的局部最优问题。最后在实物平台上进行了手眼标定实验，实验结果验证了算法的可行性和有效性。     

带耐火衬里高温反应器密封锥结构的设计

耐火衬里及支撑结构设计的可靠性是保证高温反应器壳体温度小于设计温度的关键因素。针对耐火衬里结构失效导致反应器壳体温度超过设计温度的问题,提出了一种双金属焊接的密封锥结构。该结构具有支撑金属衬里的作用以及将耐火材料与金属衬里之间的膨胀空间分割成多个密闭空间以阻止高温气体的流动,进而提高隔热可靠性。采用ANSYS软件中APDL语言建立了密封锥连接结构的有限元模型,通过研究密封锥不同角度以及厚度对计算结果的影响,得出了密封锥的最佳结构参数,并满足ASME标准的应力强度评定要求。模拟结果可为此类高温反应器耐火衬里结构的设计提供参考依据。